•   
  •   
  •   

Travel Low visibility: How aircraft operate in foggy conditions

16:45  17 november  2019
16:45  17 november  2019 Source:   thepointsguy.com

Taking a drone on your next trip? Here’s what you need to know

Taking a drone on your next trip? Here’s what you need to know Drones are becoming increasingly popular these days when it comes to tourism. 

This results in aircraft backed up at the gates and other aircraft going round holding patterns in the air , waiting for their turn to land. So why does fog cause delays, and how do pilots operate differently to Flying in foggy conditions provides challenges to pilots that are only experienced a few times a year.

However, foggy or low visibility conditions in summer isn't a common thing at Melbourne which made this particular trip a lot more interesting. Featured in this video is the first wave of heavy aircraft that kicks off the morning rush. This was filmed between 6-7am before the fog lifted and the rain began.

a screen shot of a computer© Provided by Bankrate, LLC

MSN has partnered with The Points Guy for our coverage of credit card products. MSN and The Points Guy may receive a commission from card issuers.

As winter closes in, the nights are getting colder and there’s more moisture in the air. Combine the two and you’ve got the perfect recipe for fog. While it’s great for the photographers out there, we all know that fog combined with air travel normally results in delays and disruption.

Fogbound airports are forced to reduce the number of flights taking off and landing every hour. This results in aircraft backed up at the gates and other aircraft going round holding patterns in the air, waiting for their turn to land.

Delta flight attendant accused of being nearly 7 times over alcohol limit

  Delta flight attendant accused of being nearly 7 times over alcohol limit There’s a right time and place to kick back with a drink, but at work as a flight attendant is not one of them. © FoxNews.com Whether you’re a frequent flier or have only flown on a passenger aircraft once in your life, here are five things to know about passenger planes. A Delta Air Lines attendant is facing criminal charges after police said she was several times over the alcohol limit while on duty at London’s Heathrow Airport.

Landing an airplane in fog requires good airline pilots and ILS. Pioneered as early as 1929, today’s ILS equipment allows an aircraft crew to perform a runway approach in low - visibility conditions – even in nearly zero- visibility if necessary – by keeping it apprised in real time that the plane is

It's the low visibility on the ground that poses the biggest problem for aircraft in foggy conditions . In foggy conditions , it's the poor visibility while planes are coming in to land and on the ground that poses the biggest problem, Tim Boyle, GM system operator at air navigation service provider Airways

So why does fog cause delays, and how do pilots operate differently to keep our passengers safe in foggy conditions? Here’s your guide.

What causes fog?

Fog and mist are, in effect, just clouds sitting on the ground. Mist is defined when the visibility is greater than 1 kilometer (.6 miles) and fog is when the visibility is less than 1 kilometer. There are several different types of fog, each caused by different weather conditions.

Radiation fog

Radiation fog is the type of fog you’ll most commonly see. Ever woken up in the morning to drive to work and there’s a layer of fog sitting on the road? This is most likely to be radiation fog.

On nights where there is no cloud cover to keep the heat in, the land surface loses its heat to the atmosphere. As the land cools, moist air close to the surface also cools. When the temperature of this air reaches the dew point, it is unable to hold water as a gas. This water vapor condenses around particles in the air and forms fog.

Plane carrying 107 passengers slid off taxiway at Wisconsin's Austin Straubel airport

  Plane carrying 107 passengers slid off taxiway at Wisconsin's Austin Straubel airport No one was injured after a Delta plane carrying 107 passengers slid of the taxiway Saturday morning at Austin Straubel International Airport in Wisconsin.Around 6:15 a.m. Saturday, the Delta aircraft carrying 107 passengers to Atlanta slid off the taxiway as the plane was making its way from the terminal to the runway for takeoff, airport director Marty Piette said. No one was injured and there was no damage to the aircraft.

In low visibility the tower will typically turn them up to maximum intensity. These lights are very bright, so much so that after catching sight of them I usually asked for them to be turned down. None of this light system is visible from the passenger cabin of a large aircraft save for the fact that you might

Low visibility procedures (LVP) means procedures applied at an aerodrome for the purpose of ensuring safe operations during lower than standard category I, other than standard category II, category II and III approaches and low visibility take-offs.

a sunset over a city: Early morning radiation fog. (Photo by Neil Squires/PA Images via Getty Images)© The Points Guy Early morning radiation fog. (Photo by Neil Squires/PA Images via Getty Images)

That said, if there is no wind, fog may not form at all. Instead, there will be a layer of dew or frost on the ground. For fog to form, a gentle mixing of the air is needed by a soft breeze. This allows more air to come into contact with the surface, cooling it more and creating a thicker fog.

In addition to the wind and temperature, all airfield weather reports also give us the dew point. If the temperature is getting close to the dew point, we can tell that low cloud or fog is a possibility.

As the sun rises, the surface starts to heat up. As the temperature moves away from the dew point, the air is able to hold more water vapor and the fog starts to evaporate.

Valley fog

You may have noticed the effects of valley fog when driving into a dip of a road at night. Cold air settles in the troughs of a valley and as it condenses, fog forms. It’s commonly the result of a temperature inversion that passes over the top of the valley or dip, keeping the cold air in. The fog is confined by the hills around it, and if the weather conditions are calm, it can last for several days.

This Is Exactly How Cold It Has to Be to Keep a Plane from Flying

  This Is Exactly How Cold It Has to Be to Keep a Plane from Flying Snow and sleet may cause delays, but what about frigid temps? The post This Is Exactly How Cold It Has to Be to Keep a Plane from Flying appeared first on Reader's Digest.Almost 70 percent of all delays are caused by inclement weather in a given year, according to the Federal Aviation Administration, and delays also have significant monetary consequences, including costing both travelers and airlines billions of dollars every year.

In real life, low visibility in fog will have serious impact on air traffic, and may even lead to aviation Flights would hold in the air and wait for the visibility to improve. If low visibility condition persists After landing, an airplane in fog would move slowly to avoid collision with other aircraft , vehicles or

Where is information on reduced/ low visibility operations published for air operators and pilots, and what standards control publication requirements? How does an aerodrome with multiple runways operate in reduced/ low visibility when there are different levels of service published for each runway?

Advection fog

When warm, moist air moves over the top of a colder surface, the warm air cools. If this air mass cools to the dew point, fog will form. A great example of this is the fog that forms around the San Francisco Bay.

The California Current brings cold water from Canadian waters down the Californian coast. As the warm moist air off the Pacific passes over this colder water, it condenses and forms fog. Unlike valley or radiation fog, advection fog moves laterally, being blown in over the land by the wind.

a person standing on a beach near a body of water© The Points Guy

Low Visibility Procedures

When the visibility at an airport drops below a certain level, normally 600 meters (2,000 feet), the airfield switches to Low Visibility Procedures — or LVPs. Under LVPs, the way in which ATC and aircraft operate changes significantly.

One of the main changes during LVPs is the holding points around the runways. In good weather conditions, aircraft waiting to enter the runway hold at the Category 1 (CAT 1) holding points. However, when landing in fog, the integrity of the signal that the runway sends up to the aircraft (more on this later) is vital. As a result, aircraft must wait farther back from the runway, at the CAT 3 holding point.

20 Vegetarian Super Bowl Recipes That Will Fuel You Through The Game

  20 Vegetarian Super Bowl Recipes That Will Fuel You Through The Game These are definitely not a fumble.

Today’s naval aircraft and aircraft carriers are equipped with an Automatic Carrier Landing System (ACLS). This system is similar to the common civilian Instrument Landing System (ILS). It displays vertical and horizontal "needles" on the pilot’s Heads-Up-Display (HUD) that indicate aircraft position

Low - visibility conditions often occur and can be caused by heavy snowfall, downpours, thick fog and blowing dust or smoke. Moisture can build up on the windshield both inside and out; air conditioning might help keep moisture from building up inside the cab.

In addition to this, each aircraft needs to be given a longer ‘runway occupancy’ time. Once a departing aircraft has crossed the CAT 3 holding point, it is deemed to be on the runway until it is airborne. The same with landing aircraft — they are not clear of the runway till passing the CAT 3 holding point.

Some of these CAT 3 holds can be hundreds of meters from the normal CAT 1 holds, so the runway occupancy time is massively increased. This is a large part of what causes delays.

  Low visibility: How aircraft operate in foggy conditions © The Points Guy

Taxiing

Taxiing the aircraft around the airfield in thick fog is actually more difficult than the actual takeoff or landing. Even at your home base, familiar taxiways suddenly become alien and you can quickly become disorientated. Paying attention to your surroundings is vital. Inadvertently taxiing onto a runway could prove catastrophic.

In order to prevent getting lost, we conduct a departure briefing before we push back from the gate. This will include the planned taxi route to the runway. It is a great time to highlight any areas where we might take a wrong turn and end up somewhere we don’t want to be.

In order to assist us as we move around the airfield, we have a couple of maps. One on our iPads and also on one of the flight deck screens. Using both of these together, the PM (Pilot Monitoring) is able to assist the PF (Pilot Flying) in which turn to take and when. If there is any confusion as to where we are going, we’ll bring the aircraft to a full stop and let ATC know. It’s much better to ask for help than to taxi onto an active runway.

Look of the Day

  Look of the Day At the Hollywood Critics Association Awards, Olivia Wilde mastered boho dressing in a plunging Etro gown, which was styled with a bold necklace and

Otherwise pilots train to fly in low - visibility conditions and mitigate the problems caused by fog. CAT III B landing done in foggy conditions . It's total auto landing done by instruments and auto pilots. The system which assists the pilots to land in such conditions is called "Instrument Landing

In low visibility the tower will typically turn them up to maximum intensity. the pilot came on the intercom and announced that it was too foggy down below to land, but we still had Each category has its own "minimums," which are the weather conditions required for the approach to be made.

a close up of electronics© The Points Guy

Takeoff

Once we’ve found our way to the CAT 3 holding point, it’s time to start thinking about the takeoff. Depending on the facilities available, each airport publishes the minimum visibility required to depart. That said, the visibility at the start of the runway could be quite different to that half way down, some 2 kilometers (1.2 miles) away.

In order to provide pilots with the best possible information, sensors are positioned at the start, middle and end of the runway — known as the “touchdown,” “midpoint” and “stop end.” These sensors measure the visibility in meters and are reported to the pilots. For example “RVRs are 130/350/450.” It’s these figures that determine the takeoff minima.

a screen shot of a computer© Provided by Bankrate, LLC

That said, the minima published by the airfield is the absolute minimum allowed. Airlines themselves will have their own minima down to which they will allow their aircraft to takeoff. This is normally 125 meters (400 feet). Contrary to this rule, the Boeing 787 Dreamliner, which I fly, is different. Because of the Head Up Display (HUD), we are able to reduce the takeoff minima down to just 75 meters (246 feet).

However, as I mentioned previously, the RVRs may be different at each stage of the runway. On takeoff, we require all three reported RVRs to be at least the minima required. So, on a 787 I would need RVRs of 75/75/75. If any of the three values was below 75 meters, I would not be allowed to takeoff.

Once we as a crew are happy with the reported RVRs, it’s time to go. As we start to pick up speed, the PF (normally the Captain in LVP takeoffs) is staring straight down the runway, keeping the aircraft on the centerline with their feet. The PM is scanning the engine and aircraft indications like a hawk, ready to call out any problems should anything occur.

Alaska Airlines Has Flight Discounts to See the Northern Lights

  Alaska Airlines Has Flight Discounts to See the Northern Lights The carrier is marking down flights to Fairbanks, Alaska, based on the visibility forecast of the Northern Lights. It's one of the most travel-worthy scenes on Earth: spotting the Northern Lights.There are only a few accessible locations with quality views of the colorful aurora borealis. But even if you manage to book a flight and trek out into the wilderness (where visibility is usually best), factors like weather and time of year can mean the natural phenomenon's glow doesn't appear, rendering the entire journey futile.Alaska Airlines wants to help travelers simplify their quest to see this natural wonder.

Low visibility procedures (LVP) means procedures applied at an aerodrome for the purpose of ensuring safe operations during lower than standard category I 2.2. LVP Triggering conditions . The point at which LVPs are implemented may vary from one aerodrome to another depending on local

Visual flight rules (VFR) are a set of regulations under which a pilot operates an aircraft in weather conditions generally clear enough to allow the pilot to see where the aircraft is going. Specifically, the weather must be better than basic VFR weather minima, i.e. in visual meteorological conditions

Hurtling down a strip of concrete at 180 mph when you can only see 75 meters in front of you is a pretty disconcerting experience. You have to keep faith in ATC’s ability and the procedures that all aircraft follow to keep the runway ahead of you clear. It’s exactly why, when taxiing, that you don’t want to end up on a runway by mistake.

Once airborne, the layer of fog may only be a couple of hundred feet thick. As you burst through into clear blue skies, it’s almost as if entering another world.

Approach

While there is always plenty of time to prepare for a takeoff in fog, the sudden formation of fog on a runway may catch out some poorly prepared crew. During the flight, a good crew will always be monitoring the weather at the destination. If the temperature continues to drop but the dew point remains the same, it’s an indication that fog could be on its way.

If LVPs are in force, this will be notified to the crew via the airfield’s information broadcast. This can either be picked up over the radio, or via Datalink for aircraft equipped with this technology. In addition to the usual weather, it will also give the latest reported RVRs. However, these should always be treated with a pinch of salt, as RVRs can change minute by minute.

a close up of a map© The Points Guy

In order for the pilots to guide the aircraft toward the runway, we must hook onto a signal that is projected up from the runway, the Instrument Landing System, or ILS. The ILS actually comprises of two signals.

The first, the localizer, sits short of the runway threshold but in line with the middle. This shows us where we are in relation to the centerline of the runway. The second beam projects upward at a 3 degree angle, from a point roughly 1,000 feet into the runway, abeam the touchdown point.

The aircraft detects these signals and displays them on the screens in the flight deck. We then instruct the Autopilot to latch onto these signals and follow them to the runway.

The purple haze over Arizona was caused by a marijuana farm, but it's not what you think

  The purple haze over Arizona was caused by a marijuana farm, but it's not what you think The light from a medical marijuana farm filled the sky over Snowflake, Arizona, with a strange, purple glow on a recent foggy morning. © Cara Smith Cara Smith says the grow lights from Copperstone Farms, a medical marijuana farm, reflected off of the fog in Snowflake, Arizona, and turned the early morning sky purple. Cara Smith took a picture of the scene about 6:30 a.m. Friday on her way to work at Copperstate Farms, the largest medical marijuana wholesaler in the state. require(["medianetNativeAdOnArticle"], function (medianetNativeAdOnArticle) { medianetNativeAdOnArticle.

Aircraft operating under 14 CFR Part 91 are not required to comply with established takeoff Key is then of course to make sure that no other aircraft are on the runway, and this is in fact how the Aircraft can, under certain circumstances, land in zero visibility conditions . But this requires both

Approach Minima

Like on take off, each runway, and specifically the approach to the runway has minimum weather criteria governing when we can and cannot make an approach. ILS approaches are used in foggy conditions as they have the most accurate signal.

The minima dictates the minimum RVR needed to commence an approach to land, the start of the approach normally being 1,000 feet above the ground. Once again, the three different RVRs will be reported to the pilots. This is where it gets a little complicated.

For an ILS approach to a runway, there are various different minima, depending on the equipment the aircraft has on board. For now, I’ll just discuss the most useful type of approach, “CAT 3B with no decision height.”

On these kind of approaches, we can land with a visibility of 75 meters. Also, there is no requirement to see anything out of the windscreen before allowing the aircraft to touch down, such is the accuracy of the systems. There are even redundancies built into the systems so that in the case of certain failures, the aircraft can still continue to touchdown safely.

a red traffic light: Colorful fogbound landing lights guide airplanes to runway.© The Points Guy Colorful fogbound landing lights guide airplanes to runway.

Landing

The landing itself is what’s called an auto-land. The Autopilot remains engaged all the way to touchdown and while the aircraft is decelerating on the runway. By leaving the Autopilot to do the physical flying, both pilots are able to give all our attention to making sure the aircraft is doing exactly what we want it to be doing. If the slightest thing starts to go wrong, we will notice immediately and take the appropriate action. As the aircraft passes over the threshold of the runway, the Autopilot raises the nose slightly to slow down the rate of descent. Quite often, auto-lands are fairly agricultural. The Autopilot is great at putting the aircraft in the right spot, it just sometimes lacks some grace. With the wheels firmly on the ground, we can apply the reverse thrust and allow the braking system to slow the aircraft down. All this time, the Autopilot is still keeping the nose tracking down the centerline of the runway. When we have reached taxiing speed and have identified a runway exit, the Autopilot is disengaged and the toughest part of the arrival begins — the taxi to the gate.

Bottom line

Flying in foggy conditions provides challenges to pilots that are only experienced a few times a year. That said, it isn’t always easy to predict when the conditions will fog out, so we have to be prepared at all times. Taxiing to and from the gate is potentially the most dangerous stage of the flight, with the reduced visibility making it difficult to discern your surroundings. That said, we train regularly in the simulator for operations in foggy conditions so when it happens for real, we’re well practiced in what to do. Featured photo by Charlie Page/The Points Guy.

SPONSORED: These high-value cards can help you travel in style.

Some of the cards on this list offer quite a bit more, as well! Take a look here at the top credit card offers that can help you get $1,000 or even more in value.

--

Editorial Disclaimer: Opinions expressed here are the author’s alone, not those of any bank, credit card issuer, airlines or hotel chain, and have not been reviewed, approved or otherwise endorsed by any of these entities.

Related video: The royal family of Jaipur just listed their palace on Airbnb for $8,000 a night (Provided by Travel + Leisure)

The purple haze over Arizona was caused by a marijuana farm, but it's not what you think .
The light from a medical marijuana farm filled the sky over Snowflake, Arizona, with a strange, purple glow on a recent foggy morning. © Cara Smith Cara Smith says the grow lights from Copperstone Farms, a medical marijuana farm, reflected off of the fog in Snowflake, Arizona, and turned the early morning sky purple. Cara Smith took a picture of the scene about 6:30 a.m. Friday on her way to work at Copperstate Farms, the largest medical marijuana wholesaler in the state. require(["medianetNativeAdOnArticle"], function (medianetNativeAdOnArticle) { medianetNativeAdOnArticle.

—   Share news in the SOC. Networks

Topical videos:

usr: 3
This is interesting!